SWITCHBLADE-ET 16 X 16 SWITCHING SYSTEM

SWITCHBLADE ET

The new Switchblade ET, the state of the art of our Switchblade family, is new the new standard in all analog guitar and studio effect switching systems. No other system can come close to the abilities of the ET. With the agility to connect effects in series in any order, in parallel, or in series/parallel combinations and with the ability to set levels at every connection to balance effects all under preset control, in addition to the new line/instrument levels settings on all inputs and outputs, this is the most versatile system available at any price. The audio channels of the GL are superbly transparent and with buffers on each of the 16 inputs and outputs your tone is preserved throughout your entire system. This system replaces the now discontinued Switchblade GL. The GL has been the standard and trusted by the top guitarists in the world for decades.

SWITCHBLADE ET

Channels
100% All Analog. All inputs and outputs buffered with top quality buffers.
Input / Ouput Impedance
1M Ohm input / 100 Ohm output
Input and Output Structure
1/4" TRS servo balanced (balanced or single ended depending on cable used)
Maximum Input Level
+18dBv (24V p/p) in LINE setting, +6dBv (6V p/p ) in INSTRUMENT setting
Maximum Output Level
+18dBv (24V p/p ) LINE or INSTRUMENT setting
Bandwidth (=1dB, -3dB)
5Hz - 80kHz
Matrix
16 in by 16 out true matrix
Maximum simultaneous connections
32
Gain Range
-48dB to 0dB where 0dB is unity gain
Relays for Amp Switching
6
Expression Pedal Inputs
2
Expression Pedal Type
Linear pot with ring or tip connected to center tap , normal or reverse slope OK
Footswitch Input
1/4" TRS triple momentary (i.e. Digitech FS3X or equivalent)
USB Port
Yes, front panel accessible.
MIDI Ports
MIDI IN, MIDI OUT/THRU, (MIDI INs combine MIDI OUT/THRU connection using adapter)
Power
110VAC-250VAC 20W - IEC type connection
Dimensions
19 x 6.7 x 1.7 inches (7.5 x 4.9 x 6.7 cm)
Weight
3.7 lbs. (shipping weight 6lbs)
Warranty
2 years

To learn about the Switchblade 8F specifically designed for floor systems, read on!

Go to the Switchblade 8F description page