Volcano Features & Specifications

 

The Volcano operates in either of two modes, Locally or through MIDI, selectable by internal switches.  In local mode, the user can select 1 or 15 programs using the switches and needs only an expression pedal attached to operate.  The programs select various volume ranges such as Mute to 0dB or Mute to +18dB and so on.  Several Volcanoes can be connected together in local mode using MIDI cables and all units attached will follow exactly the sweep of the first unit in the chain.  This is a great way to control the gain of several amps connected to your guitar using only a single expression pedal with no MIDI required.

 

When a MIDI controller is attached to the Volcano the number of available programs increases to 128.  Using Program Change messages you can select any fixed gain from MUTE to +18dB in 2dB increments, or a wide variety of sweep gain ranges allowing the user to select both wide and more limited ranges with various starting and ending gains when the pedals are moved.  Additional programs are available for panning (when using 2 units together), incrementing and decrementing gains by 3, 6, 9, and 12dB at a time which can be applied to both fixed gains or to the end gain of a sweep range.  There are also commands to transmit various CC commands out the MIDI port under expression pedal control, and additional commands to apply 1 of 7 available custom curves to the currently selected range. 

 

Additionally the unit will also respond to MIDI CC on/off commands to mute, bypass, turn on omni mode, and to add 3, 6, and 12dB of gain additively using up to 15 switches.  The units sweep function responds to MIDI CC #0.

 

SPECIFICATIONS:

Gain range

90dB

Gain (line setting)

-84dB to +6dB

Gain (instrument setting)

-72dB to +18dB

Pedal resolution

.375dB

Maximum input level (line setting)

15dBu (12V p/p)

Maximum input level (instrument setting)

3dBu (3Vp/p)

Maximum output level (both settings)

15dBu (12V p/p)

Gain element

dual (differential) resistor array

I/O

MIDI in, MIDI out/thru, power jack, 1/4" audio in, audio out, expression pedal input

Peak indication

-3dB (yellow) and max (red) on both input and output

MIDI for sweep control

Control Change #0 on any channel (channel set by switch)

Additional MIDI

Fixed gains and gain ranges selected by Program messages.  Modifications (boost, mute, bypass, etc.) selected by Control Change messages

Master/Slave mode

Link by MIDI cable using proprietary high speed message

Expression pedal input

TRS (stereo jack) with wiper on the ring

Power

9VDC @ 100ma 2.1mm center positive

Dimensions

4.6" X 2.7" X 1.1" (116mm X 69mm X 28mm)

Weight

7 ounces (200 grams)  Shipping weight 1 lb.