|
TWO RELAYS
The easiest way to use the
FootSim is to connect two standard 1/4" cables between the unit
and your amp's control jacks. Most amplifiers use separate
standard 1/4" jacks for the channel and reverb functions. In
this case you will be using midi to operate relays 1 and 2.
FOUR RELAYS
The scenario pictured here
takes advantage of all 4 relays in the footsim. It uses two
stereo (tip-ring-sleeve) to dual mono (tip-sleeve) cables to
connect the two jacks on the FootSim to the 4 jacks on the
controled devices. In this case relays 1 and 3 control
multieffects bypass or delay tap, while relays 2 and 4 control
the amp channel and Reverb Switch.
This same
type of setup can also be used to control two amps, 4 effects,
synth control jacks, or anything else that operates via remote
switches.
|
